Salt spray test chamber F-60A Rongjida

The salt spray test chamber is suitable for conducting neutral, acidic and copper salt accelerated salt spray tests on the protective layers of metal materials, automotive parts, electronic components and industrial products. It mainly targets the surface treatment of various materials, including coatings, electroplating, inorganic and organic films, cathodic treatment, anti-rust oil and other anti-corrosion treatments, to test the corrosion resistance of the products. Features of the salt spray test chamber 1. The entire machine is made of PVC board, and the interior is reinforced with three-dimensional technology, making the structure strong and solid without deformation. 2. It adopts an automatic system and has the function of automatically or manually replenishing the water level when it is insufficient, ensuring that the test is not interrupted. 3. Precision glass nozzle, guaranteed no crystallization blockage after 4000 hours of use. 4. All control instruments are on the same machine board, making operation simple and clear at a glance. 5. It is equipped with dual over-temperature protection and low water level warning to ensure safe use. 6. Imported temperature controller, digital display, PID control, high-stability platinum temperature probe. 7. The laboratory adopts a direct steam heating method, which heats up quickly and shortens the standby time. 8. The spray tower is equipped with a conical disperser, which has functions such as guiding the mist, adjusting the mist volume, and ensuring uniform mist fall. Technical parameters of salt spray test chamber Inner box dimensions (mm) : 600*400*450, 900*600*500, 1200*1000*500, 1600*1000*500 Outer box dimensions (mm) : 1070*600*1180, 1410*880*1280, 1900*1300*1400, 2300*1300*1400 Controller button type Temperature control PID+S,S,R microcomputer integrated controller Temperature range: Room temperature to +55℃ The platinum resistance of the temperature sensor is PT 100Q/MV The temperature uniformity is ±2 ℃ The heating system is a fully independent system, featuring a nickel-chromium alloy electric heating heater The temperature fluctuation is ±0.5℃ The tower-type spray system is equipped with a non-crystalline spray The salt spray deposition rate is 1 to 2ml/80cm ² /h The box body material is imported corrosion-resistant, anti-aging and high-strength PVC board The spray mode is continuous and the cycle can be selected at will The seal adopts a water sealing device, ensuring no salt spray overflows The test time is adjustable from 1 to 9999(hours, minutes, seconds) The power supply voltage is AC 220 V±10%, 50 HZ The test cover is made of imported impact-resistant plates, which is convenient for observing the test conditions of the test samples during the test. It is a rogue-type angled 100-degree transparent cover, which is integrated with the upper part of the laboratory. The salt water tank is made of imported PVC board and features a super-large salt water tank design to prevent the test from being interrupted due to a lack of salt water The test chamber is made of imported PVC reinforced hard plastic board as a whole, with a smooth and flat surface. It is resistant to aging and corrosion, easy to clean, and has no leakage. It eliminates the surface fading and fibrosis caused by glass-filled steel material over time